Alternativ Ignition switch

Begonnen von Pederkr, 20 Mai 2019, 09:56:20

« vorheriges - nächstes »

0 Mitglieder und 1 Gast betrachten dieses Thema.

Pederkr

Hi
As some of you looked at Nordtreff, my rebuilt ignition switch is this model. Price-wise a good solution and mechanically functioning. Can be customized 25/3 - 26 - 27 without any problems. However, it requires that the bushing for the lock cylinder on the original model be twisted out of the lamp housing and 3 holes must be drilled
Key is purchased separately.

All wires are assembled with plugs in the ignition switch.

https://www.ost2rad.de/MZ-Ersatzteile/Elektrik-Leuchten-Batterien/Zuendlichtschalter--Zuendschloss-ETZ.html

and key

https://www.ost2rad.de/MZ-Ersatzteile/Elektrik-Leuchten-Batterien/Zuendschluessel-MZ---TS.html




Pederkr



Anulu

 :applaus:

Tolle Idee. Sind alle Funktionen da? wie zB Standlicht?

Gruß Manuel

PS: Da ich weiß das du deutsch sprichst, schreib ich auch einfach deutsch ;-)
Gruß Manuel



Rock or Bust!

Pederkr

Zitat von: Anulu am 20 Mai 2019, 10:37:51
:applaus:

Tolle Idee. Sind alle Funktionen da? wie zB Standlicht?

Gruß Manuel

PS: Da ich weiß das du deutsch sprichst, schreib ich auch einfach deutsch ;-)

Alles funktioner sind da. Deutsch natürlich schreiben.  :worthy:

Pederkr

Pictures of the fitting. Looks nice when the chrome part are in place


Anulu

sehr sehr tolle Alternative! :applaus:

Gruß Manuel



Rock or Bust!

Heiko

Hi,

that's a very good idea. I have not thought that it will fit this way with the chrome cab seeing nothing from the screws.
Ariel motorcycles... upon which the sun never sets.

4Taktix

Hallo Peder,
it looks like you can access the points for cleaning from the underside, also the brass-ears for e.g. rebending, if required.
Is this the case, can you see the points move/touching the ears (from below) when you turn the knob ?

Cheers,
Sascha
Think outside the box !

Pederkr

Zitat von: 4Taktix am 20 Mai 2019, 14:40:41
Hallo Peder,
it looks like you can access the points for cleaning from the underside, also the brass-ears for e.g. rebending, if required.
Is this the case, can you see the points move/touching the ears (from below) when you turn the knob ?

Cheers,
Sascha

Hello Sascha

No nothing vissble all in a closed environment.

Peder

Pederkr

Zitat von: Heiko am 20 Mai 2019, 14:38:04
Hi,

that's a very good idea. I have not thought that it will fit this way with the chrome cab seeing nothing from the screws.

Genau  ;D

Grüss Peder

Heiko

Ariel motorcycles... upon which the sun never sets.

pallas

Zitat von: Pederkr am 20 Mai 2019, 13:55:47
Pictures of the fitting. Looks nice when the chrome part are in place
Late to the thread, but nonetheless, that ignition lock looks very convincing.

How about the key positions and can you pull-off the key in parking light position?

Pederkr

Zitat von: pallas am 27 Februar 2021, 18:20:44
Late to the thread, but nonetheless, that ignition lock looks very convincing.

How about the key positions and can you pull-off the key in parking light position?

Hi there. When you turn the key to the left 1. possision is ignition 2. possision is parking light and 3 possision is driving light. To the right 1 possision parking light whit the option to move the key and 2. possision was used by MZ to be able to push start your engine whit a flat battery. I have not used this possision.

Peder

Similar topics (5)

Hauptmenü

Anleitungen & Bücher Baureihe Specials Startseite Vergleichsliste

Presse & Wissen

Bauzeiten & Stückzahlen Historisches Liste der BMW Modelle Presseberichte Prospekte & Plakate

Foren & Literatur

Bildergalerie Bildtafel-Suche Forum: Boxerforum Handbücher Servicedaten

Allgemeine Infos

Bildtafelsuche Glossar Impressum Kontakt Sitemap

Tipps & Service

Dienstleister Händler Märkte & Museen Tipps Verschleißteile & Werkzeuge